Power Relay Sensor

Description: The IP Power Relay Sensor is a Sensor Controlled Relay that can control the electrical power to devices managed over the Internet. With easy configuration and integration with the sensorProbe product series, the Sensor Controlled Relay defines a new era in energy management.

The sensor plugs into any of our intelligent SensorProbes, such as the SensorProbe2, the SensorProbe8, or any SecurityProbe. The sensor can placed up to 1,000 feet from the SensorProbe using standard CAT5 cable (5 ft cable included).

The Sensor Controlled Relay is easily controlled by any of extensive selection of sensors. The relay can provide automatic responses to sensor alerts. This is useful, for example, to switch on the fan when the room temperature rises beyond the threshold level or to turn on a light when the motion detector is triggered. Setting up the Sensor Controlled Relay is easy with its built in autosense feature and user friendly web interface.

The Sensor Controlled Relay can also be controlled via external computers using the included snmp command line utilities either interactively or programmatically. In addition the Sensor Controlled Relay can be controlled via the integrated we interface on the sensorProbe.

The Sensor Controlled Relay provides 1 high-power SPDT 5V relay with the maximum load up to 15A at 220 VAC. It includes Metal Oxide Varistors (MOVs) and Snubber circuits to protect the open contacts of the relays from the high voltage spikes or noise transients. It monitors the power & load and accepts a control signal which is sent from the sensorProbe.

A simple, point and click web manager can set link the Sensor Controlled Relay to a sensor. When the sensor goes to the chosen state, for example, High Critical, the Relay can be made to Cycle, which will turn on and then turn off the external device for the selected period of time. In this case, when the sensor goes High Critical, the automatic response system will Cycle the relay for 20 seconds. Users can easily change the fields in the Relay Settings Menu according to their needs using the dropdown list boxes.

The Sensor Controlled Relay with the automatic response feature can give the users more flexibility in responding to the environmental alerts. Automatic response eliminates the need for the user intervention during the alarm condition.

The Sensor Controlled Relay has built in 16Amp circuit breaker and 15Amp fuse (380 VAC, 125 VDC) to give the double protection for the external devices from possible damages by electrical fault.

Status of The Sensor Controlled Relay is reported by 4 LEDs on the board. Remote monitoring of the status is available using SNMP traps, web interface, e-mail and SMS.

Features:

CAT5 Enabled sensor allows you to add up to 1000' of CAT5 cable to the sensor.

Relay contacts rated at 15A/220VAC

Operates from a single +5 V DC Power Supply powered by the sensorProbe.

Metal Oxide Varistors (MOVs) and snubber circuit protect the open contacts of the relays from high voltage spike.

4 LEDs indicate the status of the Relay, Power Supply, AC Line Voltage and AC Load Voltage.

Up to 2 Sensor Controlled Relays per sensorProbe2

Up to 8 Sensor Controlled Relays per sensorProbe8 and cameraProbe8

Full auto sense including disconnect alarm.

Specification:

Input Voltage 110 � 220 VAC

Output Voltage 110 � 220 VAC

Dimensions 115 x 80 x 40 mm