Plug in two intelligent, plug-and-play sensors into the SensorProbe2, and
monitor your asset from anywhere in the world. Set up threshold
conditions through an easy webpage interface, and be alerted via email (which
could even be tied to a pager), or via SNMP traps into a monitoring system like
HP OpenView, and stop worrying! Pull up a web page and check the
status at anytime.
The SensorProbe2 is an intelligent two-port sensor device for monitoring
environmental variations (temperature, humidity, airflow etc), power, physical threats and security. The SP2 is a
completely embedded host with a proprietary Linux like Operating System,
including TCP/IP stack, Web server, email, SMS and full SNMP functionality.
The SensorProbe2 comes with a high speed CPU, fast network connection and web
interface including subnet mask and remote syslog interface. It also has a
battery backed time of day clock! The SensorProbe2 also has advance events
filtering options. Now you can plug in our
motion detector
to the SensorProbe2!
SensorProbe2 also works with the relative humidity and temperature multi sensor module
comprising a calibrated digital output. By having both temperature &
humidity sensors in a single sensor, the SensorProbe2 can have up to a maximum
of 2 temperature & 2 humidity sensors. This extends the capability of the
SensorProbe2 to maximum of 4 sensing parameters!
Sensor Integration
The SensorProbe2 works with every
intelligent sensor we sell.
You can connect any of our plug-and-play sensors, in any combination to monitor
temperature, humidity,
water leakage,
airflow, security, detect
AC Power Line Voltage, Measure
DC Voltage, control
relays, and more. Our
sensors include an integrated data collection and graphing package to spot
trends in the airflow, temperature, humidity, etc.
Dry contacts and drivers are available for monitoring UPS status, security
systems, air conditioning status. With the optional
Dry Contact Software, you can
add up to 10 Dry Contacts (5 per port) to the SP2!
Every sensor comes with our unique autosense feature. Whenever a new type of
sensor is plugged in, the autosense will recognize it and re configure the SP2
to begin monitoring it. In the event of an alarm or temperature / humidity
threshold being exceeded, it has ability to send alert notification using Email,
SMS and SNMP Traps.
The SensorProbe2’s advanced encrypted micro code updating program can update the
SensorProbe2 firmware over the internet.
A web based interface with a user and administrator login feature helps
users to prevent unauthorized access to the device and a powerful embedded
system logging features is available. Setup is easy with the embedded web
server. There is a simple graphing utility integrated into the SP2 which can
monitor every temperature, humidity and other sensors and display a graphical
report.
SNMP Integration
The SP2 is fully SNMP compliant and configurable. Following initial
configuration by the RJ45 port to set basic parameters such as IP address,
Subnet Mask, Default gateway, SNMP community strings, trusted IP addresses and
trap destinations, the unit is fully configurable from any SNMP terminal or
Network Management product.
The SensorProbe2 is supplied with a MIB to allow its interface to SNMP based
Network Management systems such as HP OpenView, IBM Tivoli, CA Unicenter, TNG
and others.
FEATURES:
Built-in web server for easy set-up, configuration
and monitoring
Supports all major communications
protocols
Supports 2 of our intelligent autosense
plug-and-play sensors simultaneously
Fully SNMP compliant
Includes SNMP MIB
Includes SNMP utilities for setting and
getting parameters. Example programs to read and control the sensorProbe
Supports SNMP polling which allows
sensor values to be collected and graphed with host applications
Sends trap notifications to two
destinations
Sends email notifications to two email
addresses
Email and traps include the sensor
description, current sensor value
Thresholds can be set for all sensors
SPECIFICATIONS:
Dimensions
4.5" x 2.5" x 1.25"
Weight
0.242 pounds
Mounting
Rackmount, surface mount or desktop
Status LEDs
Power, Network Connectivity,
Threshold Status
Network Interface
10 Base-T Ethernet RJ-45
Power Supply
7V DC 500mA
Sensor Inputs
2 - RJ-45 ports for connecting our
intelligent sensors
Configurable analog inputs on either
sensor port (0-5VDC)
Sensor Outputs
Configurable output signals
(0VDC/5VDC) on either RJ-45 sensor port
![[Search]](http://site.gridconnect.com/web/gridsb01_t.jpg){kind=small}
